Introduction 1
Let's go over what interviews are and what you need to get the job done.
Interviews 4
- What is an Interview? 03 minLecture2.1
- Why I Love Recording Interviews 06 minLecture2.2
- Limitations in the Creative ProcessLecture2.3
- Fixing In PostLecture2.4
Types of Interviews 7
Interviews come in many shapes and sized. In this section we go over all different types of interviews and what to look out for.
- Different Kinds of InterviewsLecture3.1
- Sit Down InterviewsLecture3.2
- Two-Person InterviewLecture3.3
- Multi Person InterviewsLecture3.4
- On The Fly Interviews (OTFs)Lecture3.5
- Walk & TalksLecture3.6
- Red Carpet EventsLecture3.7
Equipment 2
- What Gear Do I Need? 11 minLecture4.1
- Expendables 14 minLecture4.2
It Starts With the Microphone 4
Sound comes down to following signal flow, which starts at the Microphone. Andrew Jones from Deity Microphones stops by talk about how to pick the right microphone for your interview.
- Selecting a Microphone 11 minLecture5.1
- Wind Protection Basics 14 minLecture5.2
- Shockmount Basics 07 minLecture5.3
- How to use a PSC Shockmount 05 minLecture5.4
Here Comes the Boom 2
Special Shoutout to K-Tek, our sponsor who loaned us a few boom poles for this shoot. Learn some boom pole basics as well as which one you should purchase.
- Boom Pole Basics 16 minLecture6.1
- Wrapping an XLR Cable 09 minLecture6.2
C Stands 4
This section is all about having the grip equipment do the work for you.
- C Stands 07 minLecture7.1
- Using a Boom Cradle 11 minLecture7.2
- Sandbags 04 minLecture7.3
- Microphone Positions and Patterns 14 minLecture7.4
Wireless Audio Concepts 3
Andrew Jones from Deity Wireless stops by to discuss wireless audio basics.
- Wireless Audio Basics 20 minLecture8.1
- Wireless Audio Components 17 minLecture8.2
- Calibrating Your Wireless System 15 minLecture8.3
Recording and Sync 4
Let's go over all the different options when it comes to recording mediums.
- Recording Basics Part 1 11 minLecture9.1
- Recording Basics Part 2 20 minLecture9.2
- Sync Sound Basics 22 minLecture9.3
- Mobile Recording Basics 15 minLecture9.4
Monitoring 3
It is all about listening. Let's talk monitoring and what to do if more people need to listen.
- Headphone Basics 22 minLecture10.1
- Who is Listening? 07 minLecture10.2
- IFB Systems 14 minLecture10.3
Sound Concepts To Consider 4
These are some of my Golden Rules of Recording Sound for Interviews. You will not want to miss them.
- Sound Rule #1 05 minLecture11.1
- When is Sound BAD? 03 minLecture11.2
- Location Basics 11 minLecture11.3
- Sound Bogeys 04 minLecture11.4
Protocols 9
Let's break down the entire interview process, from the phone call to the paycheck.
- Initial Phone Call 10 minLecture12.1
- Follow Up Phone Calls 04 minLecture12.2
- The Day Before 04 minLecture12.3
- When You Get There 19 minLecture12.4
- Right Before You Hit Record 08 minLecture12.5
- Working in Hot RoomsLecture12.6
- Communication During an Interview 07 minLecture12.7
- Wrap Out Procedure 06 minLecture12.8
- Sharing Files to Clients 21 minLecture12.9
Moving Forward 2
Let's talk about moving forward and more advanced types of interviews.
- Multi Camera Interviews 09 minLecture13.1
- Before You Go 04 minLecture13.2
Expendables
Expendables refer to all of the single-use items like tape, batteries, and even wiring accessories for working with talent. With expendables, our job can be very efficient and executable. Without expendables, we can be literally left dead in the water. For example, if we run out of batteries, how do we power our transmitters for talent? If we don’t have wiring accessories, how do we attach the microphones to talent?
This lesson is for is getting you acquainted with some of the expendables that you should have with you standing by for interviews. You should have all of these items with you for the interview, as you never know what you will need at a moments notice.
Batteries
When it comes to batteries, there are a few different types of batteries you need to be aware of in order to be prepared for anything that happens or any gear that is put in front of you.
AA Batteries (Alkaline)
These are probably the most common use batteries. They can be used in a ton of different transmitters and receivers. Make sure you understand the “draw” of the product you are placing batteries in. If a product requires a lot of amperage out of a battery, alkaline batteries are NOT recommended, as they can blow up inside the unit if the electronics are drawing too much power.
AA Batteries (Lithium)
Lithium Batteries are much better rated for higher draw electronics. If you notice that your alkaline batteries are getting majorly hot in your equipment, then use lithium instead. Or you can do it the right away and read the manual of the equipment to make sure you use the correct batteries for the job.
Re-Chargeable Batteries
We all want to do our part to save the environment as much. Reducing our use of single-use batteries is one way we can help! Re-Chargeable batteries are getting better and better all the time. Make sure you get a bunch, as they will not last as long as lithiums, so you will need to replace after time. I recommend buying enough batteries so put them in all of your products, then buying 2 more complete sets plus multiple chargers. You need to be able to charge 1/3 of the batteries at once. 1/3 in use, 1/3 standing by fresh and topped off, and 1/3 on charge.

Wiring Accessories
Transpore
Transpore is one of the items all Sound Mixers have on them every time they work. It is simply surgical tape like you would see in a doctors office. This is a great tape, very easy to use. Be careful about the edges of the tape. If they are not fastened down properly to the skin and or clothing they can catch and make noise.
Moleskin
Moleskin is another adhesive with a soft felt on the opposite side. Moleskin works absolute wonders when taping microphones to skin and clothing. The reason we love it so much is it helps to stop the bad rubbing that happens around a microphone.
There is also a new brand of URSA Tape as well as Soft Strips and that is absolutely phenomenal. It is extremely soft and doesn’t seem to make as much noise as regular moleskin to my ears.
Wiring Accessories
When it comes to wiring accessories, there is always something new to try be a long running manufacturer or a new show boat. It is best to get a bunch of direct
Furniture Blankets
Furniture pads have a ton of uses. They protect things in your car during transport. They can cover up a cart in a pinch (if you don’t have a Space Blanket for each cart”. They can even help suck up reflections in a room. Try putting a C Stand into a T shape and make a quick wall to make a bigger room smaller! If you use a C Stand in a T Shape, ensure there is a Tennis Ball on the end so there isn’t an eye poker hidden underneath the furniture pad.
Carpets
Carpets can be used for a few different purposes in interviews. Primarily, they are used to help catch the reflections so they don’t bounce off the floor and back into the microphone. It is a simple way to deaden a room quickly is to place them underneath the chair and when used in tandem with Furniture Pads.
Painters Tape
Get both Blue and Black Painters Tape. These are used to tape the carpets down to the ground. If you put a carpet down, tape it down. End of story. Get the 2″ Rolls to make it easy.

Headphones
I am not talking about your primary Sony MDR 7506’s here. These are the cheaper headsets that are passed out with IFB Systems. They can range in size and shape and more importantly, price. Here are a few of our favorite brands. I recommend buying them in bulk so they all look the same.